单位上新上一应用在weblogic控制台进行应用程序更新发布出现
java.lang.IllegalArgumentException Registered more than one instance异常，然后weblogic就异常退出.
查看AdminServer.log日志可以看到如下信息:
####<2014-7-10 下午04时28分11秒 CST>< [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <1404980891082> ####<2014-7-10 下午04时28分21秒 CST> < [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <1404980901145> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901148> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901148> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901149> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901173> < [CompressingFilter/1.4.6] CompressingFilter is being destroyed...> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901176> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901177> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901177> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901178> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901178> ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901190> (RuntimeMBeanDelegate.java:255) at weblogic.management.runtime.RuntimeMBeanDelegate. (RuntimeMBeanDelegate.java:215) at weblogic.management.runtime.RuntimeMBeanDelegate. (RuntimeMBeanDelegate.java:193) at weblogic.work.WorkManagerRuntimeMBeanImpl. (WorkManagerRuntimeMBeanImpl.java:49) at weblogic.work.WorkManagerRuntimeMBeanImpl.getWorkManagerRuntime(WorkManagerRuntimeMBeanImpl.java:59) at weblogic.work.WorkManagerCollection.addWorkManagerRuntime(WorkManagerCollection.java:774) at weblogic.work.WorkManagerCollection.initialize(WorkManagerCollection.java:187) at weblogic.application.internal.flow.WorkManagerFlow.prepare(WorkManagerFlow.java:45) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367) at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.RedeployOperation.createAndPrepareContainer(RedeployOperation.java:98) at weblogic.deploy.internal.targetserver.operations.RedeployOperation.doPrepare(RedeployOperation.java:122) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) > ####<2014-7-10 下午04时28分21秒 CST> < [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1404980901192> (RuntimeMBeanDelegate.java:255) at weblogic.management.runtime.RuntimeMBeanDelegate. (RuntimeMBeanDelegate.java:215) at weblogic.work.RequestClassRuntimeMBeanImpl. (RequestClassRuntimeMBeanImpl.java:32) at weblogic.work.WorkManagerRuntimeMBeanImpl.getRequestClassRuntime(WorkManagerRuntimeMBeanImpl.java:86) at weblogic.work.WorkManagerRuntimeMBeanImpl.getWorkManagerRuntime(WorkManagerRuntimeMBeanImpl.java:61) at weblogic.work.WorkManagerCollection.addWorkManagerRuntime(WorkManagerCollection.java:774) at weblogic.work.WorkManagerCollection.initialize(WorkManagerCollection.java:187) at weblogic.application.internal.flow.WorkManagerFlow.prepare(WorkManagerFlow.java:45) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1221) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367) at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.RedeployOperation.createAndPrepareContainer(RedeployOperation.java:98) at weblogic.deploy.internal.targetserver.operations.RedeployOperation.doPrepare(RedeployOperation.java:122) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
从上面的错误信息可以看到
redeploy operation for application, hninsiis
这说明是在更新应用程序重新加载hninsiis应用
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : com.bea:ServerRuntime=AdminServer,Name=default@hninsiis@null,WorkManagerRuntime=default,ApplicationRuntime=hninsiis,Type=RequestClassRuntime new:weblogic.work.RequestClassRuntimeMBeanImpl@1470f4af existing weblogic.work.RequestClassRuntimeMBeanImpl@3702476f
这个信息是说在加载应用程序时已经存在一个同名的应用程序，而实际上并不存在同名的应用程序
这时只能使用无所不能的MOS了,在MOS上找到了关于这个错误信息的文档
WLS 10.3.0: java.lang.IllegalArgumentException: Existing Timer Manager Has Different Work Manager (文档 ID 1097661.1) In this Document Symptoms Cause Solution References APPLIES TO: Oracle Weblogic Server - Version 10.3 to 10.3 Information in this document applies to any platform. ***Checked for relevance on 2-May-2013*** SYMPTOMS When trying to redeploy an application that uses a foreign JMS queue, the error below is shown. The server needs to be rebooted with every new deployment. Otherwise, the server fails consistently with the error: "Existing timer manager has different work manager." ###< [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1272310540224> CAUSE This issue is caused by a flaw in the WLS code such that all MDB instances/pollers on the same WLS server of the same MDB deployment share the same timer manager for message polling. When one instance is disconnected due to JMS server migration, the timer manager is stopped, which in turn stops other MDB instances on the same server. This issue is addressed by unpublished defect 7669814. SOLUTION Patches are available for unpublished defect 7669814: PATCH INFORMATION WLS Version Patch Number 10.3.0 Patch 7669814 Fixed in: 10.3.1 To apply one of these patches, click on the link for your WLS version and download the appropriate patch from My Oracle Support. You can also search in My Oracle Support for the patch number for your WLS version: for detailed instructions, please see Master Note: How to Locate and Download Patches for WebLogic Server Using My Oracle Support Document 1302053.1. For instructions on how to apply these patches to your system, please see How to Apply WebLogic Server (WLS) Patches Using Smart Update Document 876004.1. For other issues relating to Smart Update, please see Master Note on Troubleshooting Smart Update Issues Document 1230725.1. Patches are specifically tied to a particular release and maintenance pack of WebLogic Server (WLS). A patch for WLS 10.3.3, for example, very likely would not work on WLS 10.3.5. In a few cases, patches are also specific to particular operating systems. If you think you are experiencing the problem outlined in this note, and you are running a WLS version which is eligible for error correction (see Document 950131.1 for more about the Oracle Error Correction Policy), but your WLS version is not included in the list of patches provided here, please contact support and ask for a version of the patch appropriate for you. Please reference this note as well as this bug number to help speed our service for you. NOTE: Patches are applied per WLS installation and not per domain. That is, if you apply this patch on one WLS installation, then all of the servers from all the domains in that installation will have this patch. On the other hand, if you have a managed server in another machine in a domain (that is, set up with its own WLS installation), you need to install this patch on that other machine as well. Generally, patches can only be applied while the server is not running because WLS locks the needed files while it is running. If, however, you are able to apply a patch while WLS is running, you must restart WLS before the patch will take effect.
从上面的信息说已经在10.3.1这个版本已经修复这个bug了.但我们的weblogic版本是10.3.3.0
[root@sx-weblogic31 lib]# java -cp weblogic.jar weblogic.version WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Use 'weblogic.version -verbose' to get subsystem information Use 'weblogic.utils.Versions' to get version information for all modules
其实给weblogic打补丁提供了两种方法
1. Using Smart Update You can apply the patch using Smart Update with the following steps: Download the patch from My Oracle Support (MOS). For more details, please refer to Master Note: How to Locate and Download Patches for WebLogic Server Using My Oracle Support Note 1302053.1. Extract the contents from the zip file: you will have a jar file and patch-catalog_xxx.xml. A readme file may also be included. Copy the files (for example, E5W8.jar and WGQJ.jar) and the patch-catalog_xxx.xml from the zip file to the target machine. You do not need the readme file. Copy the files to the appropriate cache_dir directory for the target system: for example, on Windows, %MIDDLEWARE_HOME%\utils\bsu\cache_dir, or on UNIX, $MIDDLEWARE_HOME/utils/bsu/cache_dir. The directory MW_HOME\utils\bsu\cache_diris created as the default patch download directory when you install Smart Update 3.3.0. (see http://docs.oracle.com/cd/E14759_01/doc.32/e14143/start.htm#i1071723) NOTE: Always copy the patch-catalog_xxx.xml file from the downloaded patch to the cache_dir along with the patch itself. Do NOTrename this file. If you see an "unrecognized patch ID" error, please refer to Note 1186923.1 for details on how to resolve it. Run Smart Update and apply the patches and/or patch sets to the target system. This can be done using the Smart Update GUI or the command-line interface (see http://download.oracle.com/docs/cd/E14759_01/doc.32/e14143/commands.htm#i1074489). a. Smart Update in graphical (GUI) mode Run the/utils/bsu/bsu script (bsu.sh for UNIX, bsu.cmd for Windows). This will start the Smart Update GUI. Look for the patches you copied in the "Downloaded Patches" section at the bottom. Select the "Apply" button for each patch you want to apply. This will validate the patch and apply it to the whole installation. The following viewlet provides an example of using Smart Update in GUI mode: Video - Applying a Patch Using Smart Update in GUI Mode (1:15) Trouble seeing this video? b. Command-line interface This is the syntax for the command to view the downloaded patches as below: ./bsu.sh -prod_dir= -patch_download_dir= -status=downloaded -view -verbose For example: ./bsu.sh -prod_dir=/opt/bea/weblogic92 -patch_download_dir=/opt/bea/utils/bsu/cache_dir -status=downloaded -view -verbose This is the syntax for the command to install a patch: ./bsu.sh -prod_dir= -patchlist= -verbose -install For example: ./bsu.sh -prod_dir=/opt/bea/weblogic92 -patchlist=E5W8 -verbose -install ./bsu.sh -prod_dir=/opt/bea/weblogic92 -patchlist=E5W8,WGQJ -verbose -install This is the syntax for the command to check if the patch is installed: ./bsu.sh -prod_dir= -patch_download_dir= -status=applied -verbose -view For example: ./bsu.sh -prod_dir=/opt/bea/weblogic92 -status=applied -verbose -view 2. Applying the patch to the classpath manually You can apply the patch to the system manually by extracting the actual patch and adding it to the classpath on the system: Extract the actual patch jar file. It will be in the form .jar (for example: E5W8.jar). Inside this jar file is the actual patch jar file, which will be of the form CR326566_92mp3.jar. Extract the latter file for the following steps. Add the extracted jar file as the first element of the classpath of the Admin server as well as the managed servers in the domain. If you are starting servers using the WebLogic Server startup script, update the classpath in the startup script like this: set CLASSPATH= \jars\CR326566_92mp3.jar;%CLASSPATH% (Windows) CLASSPATH= /jars/CR326566_92mp3.jar:$CLASSPATH (UNIX) where PATCH_DIR is the directory on the machine where you extracted/saved the patch file. Similarly, if you are starting servers using Node Manager, add the patch jar to the beginning of the Class Path argument in the Server Start tab for the server(s). NOTE: Applying the patch to the classpath manually (approach 2) is recommended only for releases prior to WLS 9.1. Smart Update should be used when it is available as it provides patch conflict and dependency checking. REFERENCES
上面的第一种方法是要连接网络通过GUI界面或者./bsu.sh的命令行接口来进行但是这也是一种使用不了的方法因为很少有人把weblogic服务器置于连网状态.
所以还是使用第二种方法先下补丁Patch 7669814,然后将补丁包中的.jar文件复制到weblogic服务器主机上然后将.jar包添加到classpath环境变量中.
补丁Patch 7669814包中的文件为KG6I.jar将其复制到weblogic的lib目录下
[root@sx-weblogic32 lib]# ls -lrt total 28 -rw-r----- 1 root root 702 Mar 29 2011 readme.txt -rw-r--r-- 1 root root 23302 Jun 10 2011 KG6I.jar
下面就需要修改weblogic的启动脚本将KG6I.jar文件加载到classpath环境变量中然后再重新启动weblogic
在startWebLogic.sh中增加下面的记录
CLASSPATH=/bea11/user_projects/domains/mydomain/lib/KG6I.jar:$CLASSPATH
在重新启动weblogic之后再来更新应用程序
####<2014-7-11 上午08时54分05秒 CST>< [ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040045244> ####<2014-7-11 上午08时54分05秒 CST> < [ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040045438> ####<2014-7-11 上午08时54分05秒 CST> < [ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040045474> ####<2014-7-11 上午08时54分05秒 CST> < [ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040045476> ####<2014-7-11 上午08时54分05秒 CST> < [ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040045730> < [CompressingFilter/1.4.6] CompressingFilter has initialized> ####<2014-7-11 上午08时54分14秒 CST> < [ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040054094> ####<2014-7-11 上午08时54分14秒 CST> < [ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040054094> ####<2014-7-11 上午08时54分14秒 CST> < [ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> < > <> <> <1405040054111>